The company attaches importance to the role and training of technical talents, actively introduces foreign technical experience,and through the perfect quality management system certification, production of marketable high and new, sharp products, thus in a variety of fuel, rice, wheat, corn, and other areas of the processing machinery and equipment have domestic advantage.
Common faults and causes of peony seed oil equipment:
1. During normal use of the peony seed oil equipment, it is found that the peony seed oil equipment produces little or no powder. It is likely that the screen is blocked.
2. Peony seed oil equipment only produces peony seed oil, not bran. The common reasons are the wrong direction of the main shaft, the screen is damaged or the screen frame is not tightly sealed.
3. It was discovered that the peony seed oil equipment was working normally, but the output of peony seed oil decreased significantly. The gap between the grinding rollers should be adjusted and the spring should be compressed to ensure the same gap at both ends of the grinding roller. It is also possible that the grinding teeth have been used for too long and the wear is serious, so they should be re-drawn.
4. The temperature of the produced peony seed oil is too high. The gap between the grinding rollers should be adjusted appropriately. If it is the cause of the grinding roller wear, it should be repaired or replaced in time; be careful in summer and pay attention to the heat dissipation of the machine.
Professional Advice
Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data,so that we can make flow chart production line for you as your requirement. zhongxing machinery will stand at your point to suggest low cost and suitable production line for you. Sincerely want to cooperate with you.
Copyright © Henan Zhongxing Grain And Oil Machinery Co.,Ltd. All Rights Reserved. Powered by MetInfo
